April 12, 2014 – Keys Log: Day 10 (Part Duex) – Jenn-AAAYYYY!!

Apparently April showers do not bring May flowers on our boat.  We had just popped back out into the Gulf out of Clearwater Pass, enjoying one of the best sails yet of our trip, when we were showered with ball bearings from above.  Phillip and I gently made our way up onto the foredeck to try and figure out what in the heck on the boat had just totally busted.  We each started picking up these little bronze looking balls on the way that were lying all over.  It was clear they were bearings, but to what exactly?  We inspected the drum at the base of the forestay that furls the Jenny.

IMG_8417

She looked fine, but we could tell the bearings in the drum were the same type that had rained on the boat, so we figured it had to be the swivel shackle at the top.  We knew we were going to have to let the Jenny down to have a look at it.  Not a real problem, yet.  Perhaps we could fix it …   We were being optimistic.

Phillip started to uncleat the Jenny halyard at the mast to lower the Jenny, and I positioned myself on the foredeck, ready to grab and flake her as best I could while Phillip eased her down.  But, there was no easing about it.  As soon as Phillip uncleated the halyard and let just a little slack in it, our big, whopping (135%) Jenny all came toppling and tumbling down onto the foredeck.  Wha-boom!  Thankfully, she fell so quick, she landed all in a heap, and – more importantly – all on the boat.  Whew!

We wrapped her up with the Jenny sheets and secured her on the foredeck.

IMG_8462

And, she looked so sad there.  All tied up in a ball on the deck …  Instead of the bright-eyed, fresh-faced Jenny we saw in the early parts of Forrest Gump,

Jenny

ours looked more like the strung-out, cocaine-snorting leaper she turned into.

Jenny

Yep, that’s the one.

Our Jenny was totally busted.

IMG_8463

Jenn-AAAAYYYY!  

Unfortunately, the bad news just kept coming.  We found the reason the Jenny had come all tumbling down at once when Phillip let some slack in the line was because the halyard shackle had come apart.  There are two parts to the shackle that raises our Jenny: 1) the part that clips to the head of the sail and spins when the Jenny furls and unfurls, and 2) the part that clips to the halyard and remains still when the Jenny furls.

photo 5 (2)   Picture

Hence the ball bearings in between.  The really bummer part about what happened to our halyard swivel was that, when Phillip let just a little slack in the line, the shackle came apart – right about here –

Pic

and the part that attaches to the head of the sail came down, while the part that clips to the halyard stayed … Yep, you guessed it.  At the top of the mast.  Not ONE DAY later on this trip and we had another bloody halyard stuck up at the top of the mast.  I mean … 

We inspected the part of the shackle that had come down – the part that attaches to the head of the sail – and she did look to be in semi-working order, assuming the ball bearings were put back in.

IMG_8465   IMG_8464

We didn’t see any obvious crack or defect.  But, we had no idea what the other piece that was still at the top of the mast looked like.  It was clear there was going to be yet another mast ascension in this mate’s future to retrieve yet another halyard.

We began the troubleshooting process, which on our boat generally starts by whipping out what we call the “manuals bag” – an old canvas bag our previous owner kept on the boat that is filled to the brim with the owner’s manual to every single part and system on the boat.  I’m telling you – manuals are key.  Keep them (all of them!) and read them first when a system fails.  It’s amazing what you’ll learn.

After a quick review of the manual for our Harken furling system, we were definitely of the opinion we had perhaps pulled the halyard up too tight when we raised the Jenny after having the UV cover re-sewn during our Keys preparations.

photo 3 (2)

The halyard should be within the top 4″ of the foil, they said …

photo 4 (2)

Snug but not too tight they said …

As if that can be determined with any kind of precision.  (Insert frown here).  But, we figured we had pulled her up too tight when we raised her, causing pressure on the joint between the part that attaches to the halyard and the part that attaches to the sail, resulting in the pop and shower when we were furling the Jenny.  We certainly didn’t mean to, but it seemed we had caused the failure.  Once we started to think it back through, though, we were actually surprised to find the two pieces of the shackle had somehow miraculously held together until the very moment we had decided to drop the sail, when we were ready for her to fall.

Can you imagine if the shackle had come apart in heavy winds, when the Jenny was under full load?  The whole thing would have crashed into the water …  Along with the Jenny sheets …  And what if we had been motoring?   And one of the sheets had caught in the prop?  What if …   When we actually started to think about it, we started to consider ourselves incredibly lucky that it had happened the way that it did.  Perhaps Jenny was looking out for us after all.  Maybe she does know what love is …

Gump

Once we had pretty much diagnosed the problem – we knew we no longer had a furling Jenny – we started working toward a solution.  We started getting some of our cruising buddies on the horn to let them know what happened and get their thoughts.  We were somewhat close to Punta Gorda, where our previous owner used to keep the boat, so Phillip also decided to call him to ask for a recommendation for a good marina in the area.  He referred us to Embree Marine, where apparently they had done some work on our boat before.  We called a few times, but unfortunately no answer.  But, it was a Saturday, and we began to realize we likely weren’t going to be able to actually talk to anyone about repairs until Monday.  And, to add just a little more dung to our already-heaping pile, Phillip did some research on our Harken furling system (checked their website and some sailing blogs) and found that the fine folks at Harken don’t make the halyard swivel for our furling system anymore.  Apparently, ours was the Model 1 series, and they were now on like Model 7.  There was the real possibility we were going to have to have a whole new furling system put on the forestay.

Like I said, when it rains, it pours …

But – you remember our motto for that day?  If you don’t, let me remind you —

Stride 2

Wasn’t nothing gonna slow … us … down!  Whoa-NO!

We had to keep on movin’!  And, so we did.  We knew we were going to have to pull out of the Gulf and into St. Petersburg for repairs.  But, it was getting to be late in the afternoon, so we decided we would anchor for the night and make our way into Tampa Bay tomorrow.  Phillip started checking the maps and the cruising guides, and we found Egmont Key.  The cruising book described it with “tall palm trees, clear, and glistening waters, where couples stroll along the white beaches without a care.”

photo 1 (3)  photo 2 (2)

“Without a care … “  We could be that!  Who needs a furling Jenny?  I mean, really?  Sailors have been hoisting their Jennies for hundreds of years.  We were either going to get her repaired or hoist her the old-fashioned way.  Let’s pull on into this anchorage, make us some dinner, and keep on enjoying this trip, shall we?  We made it to a KEY!  And it was gorgeous there.  Sugar white sands, a beautiful old light house, crystal green water.  It was perfect.

We dropped anchor and jumped in for the first swim of the trip!

IMG_8474   IMG_8471   IMG_8475

“That’ll be two dollars, ma’am.”

IMG_8479   IMG_8480

Then we took a nice shower in the cockpit.

IMG_8482   IMG_8484  IMG_8485

Ahhh … 

Then it was cocktails at sunset.

IMG_8492   IMG_8493

IMG_8503

 

Phillip waved to the cruise ships that were coming through Egmont Channel.

IMG_8488   IMG_8490   IMG_8491   IMG_8496

Then we cooked up some amazing crab cakes with red peppers and the Captain’s own homemade roumalaude sauce.

IMG_8500 IMG_8499   IMG_8498   IMG_8504   IMG_8510

Yum!

IMG_8511

And, called it a night.  We’d deal with whatever the Jenny had in store for us tomorrow.

IMG_8501

We were on anchor, nice and secure.  Nothing could bother us now …

This entry was posted in Cruise to the Keys 2014, Equipment Failures, Good Grub, Good Juice, Gulf Crossing and tagged , , , , , , , . Bookmark the permalink.

15 Responses to April 12, 2014 – Keys Log: Day 10 (Part Duex) – Jenn-AAAYYYY!!

  1. Dick Grimes says:

    Looks like Captain Ron was right when he said, “If something’s going to happen, it’ll happen out there!”
    We’re enjoying your journey vicariously – thanks for writing it so well!
    Cindy & Dick Grimes (and Ben)

    • anniedike says:

      Hey Dick! So good to hear from you. And, so glad you’re enjoying our ‘chronicles.’ It was quite the trip to the Keys, I will tell you. Every day an adventure. How are you guys settling in to your home port? Or, more importantly, how is Bennie handling it? Let us know! Enjoyed hearing from you, and thanks again for the kind words!

  2. Rick. says:

    Thanks for the story about your furler Annie! It makes me want to keep an eye on ours too. Also, saw your article in the Cruisers Outpost we just received in the mail. You need to change your name to Drake now…lol!

    • anniedike says:

      Thanks Rick. I will say, you expect a lot of things to fail when you take the boat out cruising, but the swivel halyard on the Jenny just wasn’t one of them … We were definitely surprised. And, thanks for checking out the article. I haven’t seen it yet – am having trouble accessing my online subscription for some reason. Did they call me Annie Drake??

  3. Rick says:

    Their subscription department has issues (excuse the pun).

    We signed up for a year in 2013 at the Miami Boat Show (even bought a subscription as a gift for a local cruising buddy). The only issues we got were the ones they handed us at the show…lol! This year, while we were standing in line at their booth in St Pete, there were two other customers who were there to address the same problem. I spoke with Jody Bitchen and they gave us another year free plus the back issues we never received. Nice gesture.
    I’m sorry they called you Drake but due to the confusion we’ve experienced it’s not surprising. As a performer, I’ve had the names of myself, my songs and my albums mispronounced and misspelled…..lol!
    If you guys are back, we are thinking about heading to Jauna’s for the weekend. Look us up.

    • anniedike says:

      Has issues … That was perfect. What pun fun! Yeah, they’re supposed to be sending me a check for the article. I wonder if anyone will raise eyebrows that they’re paying one Annie Dike for an article written by one Annie Drake … Probably not. And, I’ll take the money regardless! Ha! Still haven’t been able to access my online subscription. I’ll probably just look for it on the shelves and Barnes and Noble and buy it like a regular bloke. No special author perks here! : )

      We’ll be headed out to Fort. McRae for the long weekend. It will probably be crazy there, but we blend well with crazy (and can handle it in small doses). If you guys head our way, let us know, if not let’s plan to catch up some other weekend out there on the hook!

    • anniedike says:

      Hey Rick. It seems you were right about the “issues.” Despite having a subscription confirmation, I’m not getting anywhere. Any chance you could send me a scanned copy or even just a pic of the article in Cruising Outpost? I’m just curious to see what it looks like. Thanks in advance!!

      Anniedike@gmail.com

  4. Rick says:

    I won’t be near a scanner till Monday or Tuesday. Let me know if you still want one then.

    BTW, we’d be heading to Ft McRea but a group of fellow PBYC folks are racing (and cruising) to Opal Beach then Jauna’s.

    • anniedike says:

      Thanks. I’ll let you know. Iguana’s is on our list of spots to check out but we’ve heard you have to watch the depth coming in. We draw 5’2″. Do you guys go there often. What do you draw?

  5. Pingback: Annie On the Ball! | Have Wind Will Travel

  6. Pingback: In the Hands of Heisenberg | Have Wind Will Travel

  7. Pingback: The Back Door Marine Supply Guy | Have Wind Will Travel

  8. Pingback: A “Sloppy” Sunset at Mallory Square | Have Wind Will Travel

  9. Pingback: The Mishap Recap | Have Wind Will Travel

  10. Pingback: Cuba Prep Update! | Have Wind Will Travel

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s