Calling all boat project fanatics, this one’s for you! Boy, did we have a time trying to get our engine aligned. While Phillip and I knew we had some kind of issue going on with our prop shaft, the key that fits in the shaft (which was always coming out and we were hammering back in, brilliant plan!), and our coupling, we didn’t know it was quite as bad as it was.
Watch along as Brandon, Shane, and the great team at www.perdidosailor.com help us diagnose and solve many issues relating to our prop shaft and how it seats in the transmission. We had a machinist re-engineer our old coupling and make us a new one. We also re-bedded the strut and replaced the gutless bearing.
And, just as boat projects always do, the boat had a lot of extra hidden work in store for us in the form of a rotten engine stringer portion (under the raw water pump on starboard, no surprise) that we had to repair along the way. Fun, fun! Misery loves company! Give it a watch! More photos and write-up available at www.havewindwilltravel.com.
I hope you all have been enjoying these shipyard videos while Phillip and I were off galavanting across the Atlantic Ocean. We’ll have plenty to share from that adventure once we get our heads back on straight. It can be hard, at times, to transition from offshore sailors back to full-time lawyers/marketing gurus. But, the work is always worth it. In exchange for all of those photos and videos of us out sailing and traveling the globe, enjoy seeing us here all grimy and greasy wedged down in the engine room on our boat! You’re welcome! B.O.A.T., am I right? : )