Have Wind Will Travel

Curious about cruising? Come aboard.

Search Icon

Menu Toggle Icon

Skip to content
  • Boat
  • Books
  • Crew
  • Our Journey
  • Get on Board
Have Wind Will Travel

Tag: credit card

June 5, 2013 – Some Soap and a Credit Card

October 29, 2013December 30, 2013anniedike

IMG_1893

Yep.  That’s the final product.  Ain’t she a beaut?  And, we got there with just a little soap and a credit card.

But, that’s the finale.  Let’s rewind (imagine that veed-viddit-viddoop sound a VCR makes), and play it from the beginning, shall we?  Now, I’m not tech-savvy enough to make one of those amazing time-lapse videos, so we’re going to do this the old-fashioned, flip-pad way.

Scroll really fast!

IMG_1814

IMG_1815

IMG_1816

IMG_1817

IMG_1818

IMG_1819

IMG_1820

IMG_1821

Wasn’t that fun?  But wait.  I still see a little fox soot on there.  Let’s see if we can’t buff that out.  “Brandon!”

IMG_1869

Perfect.  A clean slate!  Now, where’s that fancy new boat logo, and my credit card?

IMG_1875

I started sticking the logo up there, scooching it one way and then the other, trying to get it in just the right spot.  (Although I had saved us some dough by opting to apply the logo DIY style, I was sure the Captain would not be pleased with a crooked, shoddy job).  But, I was struggling to get it right.

IMG_1876

IMG_1878

Until I had the brilliant idea to bust out the level.  I’ve hung plenty a-picture frame in my day.  Surely that would do the trick?  Right?  But, as I went to measuring and leveling, the boys at the shipyard started to chuckle and sneer and get a big kick out of it.  I knew something was up.

IMG_1877

“Come on guys.  LEVEL with me.  What’s so funny?”

Our bottom-job guy finally had to break it to me.  I had made a real ass out of myself by ASS-uming the boat was level on the jacks.  Surely that was the case, right?  Wrong.  That’s what the guys thought was so funny.  The boat is just propped up so it won’t fall over.  They certainly don’t take the time to “level” a boat when they set it up in the shipyard.  What was I thinking …

So,  Bottom-Job Brandon stepped in to help this blonde and make sure I got it lined up right.  Turns out, he was a master of the old “eyeballin’ it” method (patent pending).

IMG_1873

IMG_1874

IMG_1879

With the logo finally in the right spot, we started the long, laborious process of scraping (with the credit card) and peeling (also using the credit card, our hands, elbows, a toe here and there, and just about anything we could get up there when the corner or edge of a letter began to peel off of the boat).  We used the soap (half water, half Dawn) in a spray bottle to tame unruly corners and tips back into place.

IMG_1881

IMG_1880

IMG_1884

Once Brandon felt he had passed on all the knowledge he could, he let me at it unsupervised (scary thought) while he went back to work on the hull.

IMG_1885

So, the credit card and I kept at it and got the job done.  (Thankfully, I am a master with the credit card!  Cha-ching!).

IMG_1888

IMG_1886

“Ahhh … time to rest.”

Nope.  We still had to do the hailing port.  I called Brandon back in to lend his special “eyeball” technique for the “Pensacola, FL” portion of the logo and we went back to peeling and scraping.

IMG_1889

IMG_1890

IMG_1891

The hailing port portion of the logo was the toughest because of the through-holes on the back of the bilge (where the bilge pump drains out).  Some of the letters had to come up and over these fittings, which was tough.  I seriously thought we were going to lose the tail end of the “a” on Pensacola.  I had to cut it off and stick it back up there and it kept falling off.  It’s like a 2 cm piece of green sticker that dropped like 5 times to the dirty, asphalt parking lot of the shipyard.  It finally stuck and to this day, when I scrub the stern, I am amazed to see it there.

IMG_1894

That “a” was a real pain, but I kept at it, and finally peeled the whole thing back.  And … voila!

IMG_1893

IMG_1895

IMG_1896

Boat logo done.  Now that she had her new name, we were ready to splash her back in the water.  We had scheduled the splash ceremony for June 7, 2013.

I did not know at the time, but in the world of cruising, a boat re-naming ceremony (also known as a “splash ceremony”) is kind of a big deal.  This will give you a clue (http://www.boatnames.com.au/boat-naming-renaming-ceremony.htm), but note the instruction: “Buy a bottle of good Champagne & invite your friends to witness and party.”  

I was definitely excited.

Of course plenty of other extremely critical and exciting things happened while the boat was on the jacks but I, naturally, focused primarily on my logo job.  I am the center of this universe, you know.   But – let’s get a quick recap:

Blister and pockmarks and abrasions abound!  She was covered with them:

IMG_1811

IMG_1806

Tons of small ones,

IMG_1809

And, even some oozing ones,

IMG_1807

Thankfully, we got lucky (which is rare) with the monstrous one in the back that we thought was a potential core leak.

IMG_1804

Turns out the low-pitched, “thud” our surveyor heard when he was giving our girl a “good banging” during the sea trial, was not a leak to the core, just a blister in the fiberglass coating on the hull.  Where some sailboat hulls are completely fiberglass, we have a balsa core on our boat which is covered by fiberglass.  If you were to take a core sample of our hull, it would look something like this:

Core

Meaning, had that leak near the strut joint on our hull made its way to the balsa core, our repair job could have looked something like this:

balsa core

But, like I said, we were extremely lucky.  Our fiberglass turned out to be super thick.  Bottom-job Brandon said he was afraid to keep drilling because he started to think we didn’t have a balsa core after all, just fiberglass.  But, he finally reached wood and found it to be completely dry.  There was no leak to the core.  He gave it the seal of approval and filled her back in.

We checked all the through-holes to make sure they were clear and fully-functioning.  This is the paddle wheel that spins to register speed on the electronics panel.

IMG_1808

We ran through that system and checked the electronics.

IMG_1871

She was good to go.

We gave the plastic rub rail a hard-core acetone rub-down and polished up the stainless steel stanchions and pulpit.

IMG_1865

“Brilliant!” says the Orbitz chick!

Orbit

And, for all you “lint-licking” fans out there: http://www.youtube.com/watch?v=WEJJUGJZxpU.  “What the french, toast?”

We removed what was left of the warped, worn davits brace that caused us to lose the dinghy in the middle of the Gulf during the Crossing.

IMG_1872

We lost Phillip to a lazarette.

IMG_1825

He thought it was best he go in to check on the bilge pump through-hole.  After he spent 10 minutes wriggling and writhing and birthing himself from the lazarette, he learned to next time always send me into tight, cramped spaces on the boat.  Don’t worry, you’ll see me in the same, humiliating, compromising position soon.  Lazarettes are scary!

On top of ALL that, the boat was fully-primed and painted.

IMG_1864

IMG_1826

And, with the new logo on the back, she was ready to make a splash!

IMG_1898

As were we!

But, I had some more work to do.  Either because I’m the first mate, or the only lady that would be there for the splashing (probably the latter), I was told I was going to be the one to smash the bottle on the hull for the re-naming.  While I was flattered, I was also a little nervous.  The guys at the shipyard made a big deal out of telling me what bad luck I would bestow upon the ole’ Rest and all of her progeny if the bottle didn’t break (into a million pieces!) on the first swing.  I headed to the store that night and scooped up a dozen bottles of champagne – some for sipping, and others for practice “smash” swings on steel poles and road signs around town (yes, that was me).  I was going to be sure my bottle scattered into oblivion when she struck the hull.  I had to be ready!

Boat Projects, Bottom Job blisters, boat decal, boat logo, boat re-naming, bottom job, core leak, credit card, decal application, level, splash ceremony, up on the hard 10 Comments

Follow Us on Instagram

When a Wednesday night regatta comes racing right through your anchorage! Free happy hour entertainment! This was some sporty sailing (in 18-20 knots of breeze) and they were really showing off their keels. So fun to see them zip right around UbiQ on the hook near Vilano Beach in St. Augustine. Sail on racers!! ⛵ #havewindwilltravel #regatta
May 7, 2016. Watching the Kentucky Derby 🐎 on a friend’s boat while anchored at Ft. McRee. What a fantastic memory. Time flies! (But you’re the pilot 😉) #havewindwilltravel #ftmcree
Sometimes I see a photo of myself and wonder how this could possibly be my life. My amazing life … 🥰 but then I remember it’s all about choices, and hard work, and a lot of luck and I’m just grateful. This me, my world, and the life that I’ve built. I’ll be turning forty this month and, looking back, I think I’ve done pretty darn good! Bring on the next 40! #noregrets #havewindwilltravel
Salty sailors converge in Key West! It seems many roads cross here. Ran into BaBaLu (to my right) two slips down from us at the City Marina in Key West Bight and Russ (to my left) who captains the Appledore Star schooner there. Russ helped us re-build our stringers and mast step on our Niagara back in 2016 and BaBaLu is a long-time fellow Pensacola sailor whom crossed wakes with for years. So fun to get this salty crew back together in funky Key West! #havewindwilltravel #keywest #pensacola #sailors
Turns out 46’ is a whole lot more than 35’. Just completed my first solo bottom scrub on UbiQ. She’s got an impressive hull done there but a BIG one. Whew! This little scrubber was tuckered afterward. Time for a drink! 🍷 And a shower. 🚿 Maybe in that order. 😜#havewindwilltravel #outbound46 #bottomjob
Caught sight 👀 of the Geckos sailing by us recently outside of No Name Harbour near Miami. It’s pretty cool when you’ve been cruising a while and you keep crossing paths with the same awesome folks. It’s really a small world 🌍 out here. Sail on sexy Geckos. Sail on! 👋 ⛵️ 💨 #havewindwilltravel #lazygeckosailing #miami #cruisers
https://youtu.be/nt9FvHIK1O4
https://youtu.be/W-41fwVAfVc
Check out our videos our YouTube

Archives

Follow Blog via Email

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 816 other subscribers

Email me!
Powered by WordPress.com.
Scroll to Top
 

Loading Comments...