Have Wind Will Travel

Curious about cruising? Come aboard.

Search Icon

Menu Toggle Icon

Skip to content
  • Boat
  • Books
  • Crew
  • Our Journey
  • Get on Board
Have Wind Will Travel

Tag: level

June 5, 2013 – Some Soap and a Credit Card

October 29, 2013December 30, 2013anniedike

IMG_1893

Yep.  That’s the final product.  Ain’t she a beaut?  And, we got there with just a little soap and a credit card.

But, that’s the finale.  Let’s rewind (imagine that veed-viddit-viddoop sound a VCR makes), and play it from the beginning, shall we?  Now, I’m not tech-savvy enough to make one of those amazing time-lapse videos, so we’re going to do this the old-fashioned, flip-pad way.

Scroll really fast!

IMG_1814

IMG_1815

IMG_1816

IMG_1817

IMG_1818

IMG_1819

IMG_1820

IMG_1821

Wasn’t that fun?  But wait.  I still see a little fox soot on there.  Let’s see if we can’t buff that out.  “Brandon!”

IMG_1869

Perfect.  A clean slate!  Now, where’s that fancy new boat logo, and my credit card?

IMG_1875

I started sticking the logo up there, scooching it one way and then the other, trying to get it in just the right spot.  (Although I had saved us some dough by opting to apply the logo DIY style, I was sure the Captain would not be pleased with a crooked, shoddy job).  But, I was struggling to get it right.

IMG_1876

IMG_1878

Until I had the brilliant idea to bust out the level.  I’ve hung plenty a-picture frame in my day.  Surely that would do the trick?  Right?  But, as I went to measuring and leveling, the boys at the shipyard started to chuckle and sneer and get a big kick out of it.  I knew something was up.

IMG_1877

“Come on guys.  LEVEL with me.  What’s so funny?”

Our bottom-job guy finally had to break it to me.  I had made a real ass out of myself by ASS-uming the boat was level on the jacks.  Surely that was the case, right?  Wrong.  That’s what the guys thought was so funny.  The boat is just propped up so it won’t fall over.  They certainly don’t take the time to “level” a boat when they set it up in the shipyard.  What was I thinking …

So,  Bottom-Job Brandon stepped in to help this blonde and make sure I got it lined up right.  Turns out, he was a master of the old “eyeballin’ it” method (patent pending).

IMG_1873

IMG_1874

IMG_1879

With the logo finally in the right spot, we started the long, laborious process of scraping (with the credit card) and peeling (also using the credit card, our hands, elbows, a toe here and there, and just about anything we could get up there when the corner or edge of a letter began to peel off of the boat).  We used the soap (half water, half Dawn) in a spray bottle to tame unruly corners and tips back into place.

IMG_1881

IMG_1880

IMG_1884

Once Brandon felt he had passed on all the knowledge he could, he let me at it unsupervised (scary thought) while he went back to work on the hull.

IMG_1885

So, the credit card and I kept at it and got the job done.  (Thankfully, I am a master with the credit card!  Cha-ching!).

IMG_1888

IMG_1886

“Ahhh … time to rest.”

Nope.  We still had to do the hailing port.  I called Brandon back in to lend his special “eyeball” technique for the “Pensacola, FL” portion of the logo and we went back to peeling and scraping.

IMG_1889

IMG_1890

IMG_1891

The hailing port portion of the logo was the toughest because of the through-holes on the back of the bilge (where the bilge pump drains out).  Some of the letters had to come up and over these fittings, which was tough.  I seriously thought we were going to lose the tail end of the “a” on Pensacola.  I had to cut it off and stick it back up there and it kept falling off.  It’s like a 2 cm piece of green sticker that dropped like 5 times to the dirty, asphalt parking lot of the shipyard.  It finally stuck and to this day, when I scrub the stern, I am amazed to see it there.

IMG_1894

That “a” was a real pain, but I kept at it, and finally peeled the whole thing back.  And … voila!

IMG_1893

IMG_1895

IMG_1896

Boat logo done.  Now that she had her new name, we were ready to splash her back in the water.  We had scheduled the splash ceremony for June 7, 2013.

I did not know at the time, but in the world of cruising, a boat re-naming ceremony (also known as a “splash ceremony”) is kind of a big deal.  This will give you a clue (http://www.boatnames.com.au/boat-naming-renaming-ceremony.htm), but note the instruction: “Buy a bottle of good Champagne & invite your friends to witness and party.”  

I was definitely excited.

Of course plenty of other extremely critical and exciting things happened while the boat was on the jacks but I, naturally, focused primarily on my logo job.  I am the center of this universe, you know.   But – let’s get a quick recap:

Blister and pockmarks and abrasions abound!  She was covered with them:

IMG_1811

IMG_1806

Tons of small ones,

IMG_1809

And, even some oozing ones,

IMG_1807

Thankfully, we got lucky (which is rare) with the monstrous one in the back that we thought was a potential core leak.

IMG_1804

Turns out the low-pitched, “thud” our surveyor heard when he was giving our girl a “good banging” during the sea trial, was not a leak to the core, just a blister in the fiberglass coating on the hull.  Where some sailboat hulls are completely fiberglass, we have a balsa core on our boat which is covered by fiberglass.  If you were to take a core sample of our hull, it would look something like this:

Core

Meaning, had that leak near the strut joint on our hull made its way to the balsa core, our repair job could have looked something like this:

balsa core

But, like I said, we were extremely lucky.  Our fiberglass turned out to be super thick.  Bottom-job Brandon said he was afraid to keep drilling because he started to think we didn’t have a balsa core after all, just fiberglass.  But, he finally reached wood and found it to be completely dry.  There was no leak to the core.  He gave it the seal of approval and filled her back in.

We checked all the through-holes to make sure they were clear and fully-functioning.  This is the paddle wheel that spins to register speed on the electronics panel.

IMG_1808

We ran through that system and checked the electronics.

IMG_1871

She was good to go.

We gave the plastic rub rail a hard-core acetone rub-down and polished up the stainless steel stanchions and pulpit.

IMG_1865

“Brilliant!” says the Orbitz chick!

Orbit

And, for all you “lint-licking” fans out there: http://www.youtube.com/watch?v=WEJJUGJZxpU.  “What the french, toast?”

We removed what was left of the warped, worn davits brace that caused us to lose the dinghy in the middle of the Gulf during the Crossing.

IMG_1872

We lost Phillip to a lazarette.

IMG_1825

He thought it was best he go in to check on the bilge pump through-hole.  After he spent 10 minutes wriggling and writhing and birthing himself from the lazarette, he learned to next time always send me into tight, cramped spaces on the boat.  Don’t worry, you’ll see me in the same, humiliating, compromising position soon.  Lazarettes are scary!

On top of ALL that, the boat was fully-primed and painted.

IMG_1864

IMG_1826

And, with the new logo on the back, she was ready to make a splash!

IMG_1898

As were we!

But, I had some more work to do.  Either because I’m the first mate, or the only lady that would be there for the splashing (probably the latter), I was told I was going to be the one to smash the bottle on the hull for the re-naming.  While I was flattered, I was also a little nervous.  The guys at the shipyard made a big deal out of telling me what bad luck I would bestow upon the ole’ Rest and all of her progeny if the bottle didn’t break (into a million pieces!) on the first swing.  I headed to the store that night and scooped up a dozen bottles of champagne – some for sipping, and others for practice “smash” swings on steel poles and road signs around town (yes, that was me).  I was going to be sure my bottle scattered into oblivion when she struck the hull.  I had to be ready!

Boat Projects, Bottom Job blisters, boat decal, boat logo, boat re-naming, bottom job, core leak, credit card, decal application, level, splash ceremony, up on the hard 10 Comments

Follow Us on Instagram

I've got this downloaded and cued up to listen to while on passage. ⛵ 🎧 This was such a fun experience, chatting with these two "Caribbean Thriller" authors, Douglas Pratt and Nicholas Harvey, about sailing, writing, working as a lawyer remotely, a potential idea for my next book plot, forgetting to wear pants in Cuba, and ... OH! ... my least favorite singer. A lot of fun stuff packed in here. Many thanks to Doug and Nick for having me on their podcast among many other talented and interesting characters. Up today at HaveWind or via the link below. Give it a click and a listen. Enjoy!
Can you feel that? Salt air on your skin, the crush of water under the hull, the billion stars at night. The experience of an offshore passage is unparalleled. Excitement, fear, pride. I’m reminded of it all as Phillip and I are currently planning a big trek north to get Ubiquitous safe for hurricane season. Weather routing and provisioning are in the works. Stay tuned! ⛵️ 🌊#havewindwilltravel #offshore #passage #sailing #outbound46
Kiting in the Atlantic! 🏄‍♀️ It’s been a minute (few months) for us, but it was time to knock the rust off. I got pummeled a bit in the surf but didn’t have a kitemare and enjoyed meeting the lifeguard who called me back to the beach saying I was scaring the children with my kite. Haha. Phillip crushed it as usual. We had a great time. Thank you summer! 🌞
Finally got to use our new Brownie’s Third Lung compressor (110V) to scrub Ubi’s bottom. 🧼💪🤿 What a game changer! I’m not great at holding my breath (full disclosure: I suck at it and learning to hold it for 2 mins+ is on my bucketlist). That said I always hate how “hasty” I feel I have to be while free diving a bottom job. Being able to stay down and take the necessary time to really inspect her hull and clean her right felt wonderful. Any of you using a compressor system to scrub your bottoms? Thoughts? #havewindwilltravel #outbound46 #browniesthirdlung #bottomjob
While doing NYC the Port Washington way was nice, there’s something to be said about stepping off the boat right onto Brooklyn’s Peir 1 waterfront Park. 🥰 When Phillip and I heard from fellow cruisers while making our way north up the east coast last year that a new marina was opening up in Brooklyn, we were intrigued! There was also talk of state-of-the-art attenuators the marina and its design team engineered to tame the aggressive wake and waters of New York Harbor. Phillip and I decided we had to give this fascinating new marina—Brooklyn ONE 15—a try, so we booked a week in late September October for our Big Brooklyn Splurge! Read about our two-week stay in Brooklyn fresh up on the HaveWind blog today: Brooklyn One° 15 Marina – The (Soon-to-Be Poor Man’s) Way to Do NYC.
Sailing by Statue of Liberty.🗽😍 Such a cool feeling. How many of you have done it? This was from our entry (first ever) into the Long Island Sound last summer and we’ll be headed back again soon this year. So many memories (old and new) await! #havewindwilltravel #statueofliberty #newyork #sailing #longislandsound #newengland
https://youtu.be/nt9FvHIK1O4
https://youtu.be/W-41fwVAfVc
Check out our videos our YouTube

Archives

Follow Blog via Email

Enter your email address to follow this blog and receive notifications of new posts by email.

Join 811 other subscribers
Email me!
Powered by WordPress.com.
Scroll to Top
 

Loading Comments...